ZTTEK
NOVAPTraders Private Limited
← All battery solutions
5kWh Residential Battery — image 1

HEARTH · Residential Energy Storage

5kWh Residential Battery

Model · ZT-RESS-LV-WM-5K-G7

A 5.12kWh LFP home energy-storage battery with ≥8000 cycles at 80% DOD and 50A continuous charge / discharge.

Key features

  • LFP lithium-iron-phosphate cells
  • ≥8000 cycles @ 80% DOD
  • 50A continuous charge / discharge; 100A peak
  • CAN / RS485 communication; optional Bluetooth
  • Built-in WiFi monitoring through the supported app
  • Compatible with micro-inverters
  • Real-time battery health monitoring and remote fault diagnosis
  • Wall-mount / floor-standing installation

Applications

  • Residential energy storage
  • High-power home loads
  • Micro-inverter-compatible energy storage

Installation information

Designed for indoor use with IP21 protection. The specification table lists wall-mounted installation; the feature page also supports floor-standing installation. Natural convection cooling. Power derating is required above 2000m. Mounting hardware, clearances and wiring procedures are not provided in this datasheet; request the installation manual.

Technical specifications

Battery & performance

Model
ZT-RESS-LV-WM-5K-G7
Battery Type
LFP
Cell Capacity
≥100.0 Ah
Capacity
5.12 kWh
Nominal Voltage
51.2 V
Max. Charge Current
50 A
Max. Discharge Current
50 A
Peak Current
100 A
Cycle Life
≥8000 cycles @ 80% DOD

Communication & installation

Communication
CAN / RS485 (Bluetooth Compatibility)
WiFi Connectivity
Built-in WiFi
Dimensions
418 × 170.5 × 667 mm
Weight
47 ± 2 kg
Installation Method
Wall-mounted
Cooling Method
Natural Convection
Protection Rating
IP21

Operating & storage conditions

Operating Temperature
Charge: 0 ~ 55 °C; Discharge: -20 ~ 55 °C
Storage Temperature
0 ~ 25°C (Storage life: 10–12 months); -5 ~ 35°C (Storage life: 2–3 months)
Relative Humidity
85±25%
Max. Operating Altitude
4000 m, Power derating required above 2000 m

All specifications are for reference only. Dimensions and weight are approximate and subject to change as product design is finalized.